Foot mounted electric wire rope hoist for crane from HY crane hometown

1.Capacity:0.5~32t 2.Max lift height:114m 3.Handle control or wireless control 4.Light weight,small volume 5.Stationary typ

Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.

Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.

Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric apparatus controlling system: Model CD1 and MD1 is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thickened and dilated, so that it is not easy to be damaged.

Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.

Optional Features:

· Electrical Operated Cross Traveling Trolley for straight or curved path

· VVF drive

· Wireless Radio remote control

· Single/Double speed

  

Model		CD1 foot mounted electric wire rope hoist
Capacity		Tons		0.5	1	2	3	5	10	16
Hoisting height		M		6,9,12	6,9,12,18,24,30				9,12,18,24,30
Hoisting speed		M/MIN		8	8				7	3.5
Travel speed		M/MIN		20/30	20/30	20/30	20/30	20/30	20/30	18
Wirerope		Dia.(mm)		4.8	7.4	11	13	15	15	17.5
		Spec.		6x37+FC	6x37+FC				6x37+FC	6x37+FC
Hoisting motor	Type	Type		ZD121-4	ZD122-4	ZD131-4	ZD132-4	ZD141-4	ZD151-4	ZD151-4
	Power	Power(kW)		0.8	1.5	3	4.5	7.5	13	13
	Rotation speed	Rotation speed(r/min)		1380	1380	1380	1380	1400	1400	1400
	Current	(A)		2.2	4.3	7.6	11	18	30	30
Travel motor	Type	Type		ZDY111-4	ZDY111-4	ZDY112-4	ZDY112-4	ZDY121-4	ZDY121-4	ZDY121-4
	Power	Power(kW)		0.2	0.2	0.4	0.4	0.8	0.8x2	0.8x2
	Rotation speed	Rotation speed(r/min)		1380	1380	1380	1380	1380	1380	1380
	Current	Current(A)		0.72	0.72	1.25	1.25	2.4	2.4	2.4
Power		3PAC 220v/230v/380v/400v/415v/440v380V,50HZ/60HZ,

You are warmly welcome to visit our factory!

Foot mounted electric wire rope hoist for crane from HY crane hometown